Pure (2R,3R). Both centres known.
- Enhanced InChI
- /t3-,4-/m1/s1
- Standard InChI
- /t3-,4-/m1/s1
A wedge says how a centre is drawn. A label says what is in the bottle. This page shows how the labels abs, or and & on a drawing become an InChI.
One drawing of 3-chlorobutan-2-ol, three different samples. With enhanced stereochemistry each one gets its own InChI:
/t3-,4-/m1/s1/t3-,4-/s2/t3-,4-/s3Standard InChI treats every wedge as known and gives all three /t3-,4-/m1/s1.
Every stereocentre carries one label. Centres with the same label and number form a group and change together.
Absolute. The sample is exactly what is drawn.
A wedged centre with no label counts as abs too.
One stereoisomer: what is drawn or the group inverted. Nobody knows which.
Drawn as separate dashed vials: the sample is one of them.
A mixture: what is drawn and the group inverted, 1:1.
Drawn as one vial holding both.
The digit on the right is what InChI writes for that class in its /s layer.
Example: 3-chlorobutan-2-ol, C2 labelled abs, C3 labelled &1. The sample is (2R,3R) mixed with (2R,3S).
Wedges give each centre a configuration. Labels say how much of it is known.
The structure editor stores the labels in the V3000 molfile as
STEABS (abs), STERELn (orn) and
STERACn (&n).
Only V3000 files carry labels. A V2000 file gives a standard InChI.
If any check fails, InChI warns and drops all labels. The result is then the standard InChI, never a guess.
InChI gives every atom a canonical number (grey). It is the same for every drawing of the molecule. Here C3 is 3 and C2 is 4. All later steps use these numbers.
Labels on atoms that are not stereocentres are ignored.
| group | centres | contains |
|---|---|---|
| absolute set | 4 (C2) | every abs centre plus every wedged centre without a label |
| &1 | 3 (C3) | the centres labelled &1 |
From the drawing, each centre gets a sign, + or −. (The sign is InChI's parity. It is not R/S, although here + happens to be R.) The drawing gives 3+ and 4+.
In each group, look at the lowest-numbered centre. If it is +, flip every sign in
that group. Flipping an or or & group changes nothing chemically: the group stands for
both configurations anyway. Flipping the absolute set does change the molecule, so InChI
notes the flip in /m.
| group | centre | as drawn | written | remembered in /m | |
|---|---|---|---|---|---|
| &1 | 3 | + | flip | − | nothing |
| absolute set | 4 | + | flip | − | /m1 (flipped) |
No flip of the absolute set gives /m0. No absolute set at all gives no /m.
/t at its absolute centres1(4) centre 4 is absolute,
3(3) centre 3 is racemicThe prefix InChI=1B marks the string as enhanced (beta), so it is never
mistaken for a standard InChI.
Draw C3 the other way, (2R,3S). The &1 group now starts at 3−: no flip. C2 is
unchanged: flip, /m1. Same sample, same InChI:
In /s: 1 abs, 2 or,
3 &. Each group lists its centres in brackets.
/s1(4)3(3)The digit is written once, followed by each group in brackets, ordered by their lowest centre.
/s2(3)(4)All centres abs, or all in one or group, or all in one & group: only the digit.
Identical to standard InChI with no option, -SRel or -SRac.
/s2A wedged centre without a label joins the abs centres. It keeps /m
and keeps groups beside it in brackets.
/m1/s3(4)Each group is flipped as a whole until its lowest-numbered centre is −. So every drawing of the same sample gives the same string.
/m only with something absoluteIf no centre is absolute, there is no /m. /m1 means the
absolute set was flipped, /m0 that it was not.
/t3-,4-/s3A label on a CH₃, CH₂ or a non-stereogenic atom is ignored.
A centre in two groups, two abs groups, or a group across two molecules: InChI warns
and returns the standard InChI with prefix 1B.
Every row uses the same (2R,3R) drawing. Only the labels change.
The vials show what the sample contains. Strings are shown from /t on; the part
before is the same everywhere.
Pure (2R,3R). Both centres known.
One enantiomer, unknown which. The relative configuration is known.
The racemate: both enantiomers, 1:1.
C2 is known (R); C3 is a mixture of both epimers.
C2 is known (R); C3 is one configuration, unknown which.
Any one of the four stereoisomers. Each centre unknown on its own.
All four stereoisomers. Each centre racemic on its own.
C3 is known (R, wedged, no label); C2 is racemic.
A salt, a solvate or a mixture has one InChI with one slot per molecule, separated by
;. Each molecule has its own groups and its own /m digit. A
. in /m means "nothing absolute here".
(R)-Pentan-2-ol, wedged, no label; butan-2-ol labelled &1 (racemic); water.
| pentan-2-ol | butan-2-ol | water | |
|---|---|---|---|
| /t | 5- | 4- | none |
| /m | 1 | . | . |
| /s | abs | 3 | none |
An empty /s slot beside a molecule with stereo means absolute.
One &1 over both alcohols would say "the (R,R) and (S,S) pairs". That links two separate molecules, which one-slot-per-molecule cannot express.
/t5-;4-/m10/s1The file's &1 group also lists the CH₃ (canonical 1) beside C3. That atom has no configuration, so it is left out. The result equals the example above:
trans-Cyclohexane-1,4-diol has a mirror plane through C1, C4 and both OH groups. Its mirror image is the same molecule. So &1 means "a 1:1 mixture of this molecule and itself", and or1 means "this molecule or itself". Both say nothing beyond the drawing, so InChI ignores them.
The rule: a group is ignored when it holds every stereocentre of a meso molecule. One group per centre is different: flipping one centre turns trans into cis, a different molecule, so those groups stay.
The side-chain centre makes this molecule chiral. The two ring centres only fix trans:
flipping both keeps the ring trans. So &1 on the ring says
nothing, and the InChI should be the unlabelled one, /t8-,9-,10-/m1/s1.
The example from the BIOVIA white paper on enhanced stereochemistry uses every class, with two or groups and two & groups. Grey numbers are canonical.
| /s part | meaning | centres |
|---|---|---|
| 1(15) | absolute | 15 |
| 2(13,14) | or: one of two, unknown which | 13, 14 |
| 2(21,23) | or: one of two, unknown which | 21, 23 |
| 3(17) | and: mixture of both | 17 |
| 3(18) | and: mixture of both | 18 |
/m1 is present because centre 15 is absolute.
Input. A V3000 molfile with stereo collections: STEABS (abs),
STERELn (orn), STERACn (&n). Editors and
toolkits write them when you set the labels; the datasets of this spec hold such files from
BIOVIA, Ketcher, Indigo, RDKit, OpenChemLib and CDPKit. RDKit also writes them from
CXSMILES like C[C@H](O)CC |&1:1|.
Command line. Add -EnhancedStereochemistry. The racemate from the
gallery:
$ inchi-1 racemate.mol -STDIO -AuxNone -Key -EnhancedStereochemistry InChI=1B/C4H9ClO/c1-3(5)4(2)6/h3-4,6H,1-2H3/t3-,4-/s3 InChIKey=XKEHIUIIEXXHJX-APQYWOSTBA-N
Without the option InChI ignores the labels and reads the wedges as absolute:
$ inchi-1 racemate.mol -STDIO -AuxNone -Key InChI=1S/C4H9ClO/c1-3(5)4(2)6/h3-4,6H,1-2H3/t3-,4-/m1/s1 InChIKey=XKEHIUIIEXXHJX-QWWZWVQMSA-N
From a program, pass the option to the InChI library like any other, e.g.
MakeINCHIFromMolfileText(molfile, "-EnhancedStereochemistry", &output)
or in the options string of GetINCHI. The InChI starts with
InChI=1B/: a beta feature, so the format can still change.