No wedges needed: the 3D geometry fixes the axis. +44° is P.
- New InChI
- /t11-/m1/s1
- Standard InChI
- no stereo layer
Some biaryls cannot rotate about the bond between their rings. Their two twisted forms are mirror images that can be separated in a bottle. Standard InChI gives both the same identifier. The new InChI tells them apart.
/t11-/m0/s1/t11-/m1/s12,2'-Dibromo-6,6'-dichlorobiphenyl. Standard InChI has no stereo layer for
either form: both are InChI=1S/C12H6Br2Cl2/c13-7-3-1-5-9(15)11(7)12-8(14)4-2-6-10(12)16/h1-6H.
Two flat rings joined by a single bond normally spin freely. Bulky groups next to that bond, in the ortho positions, collide when the rings try to pass each other. The molecule stays twisted one way or the other. The bond becomes a chirality axis, like the axis of an allene.
The two forms are named M and P (minus and plus, the sense of the twist), or
aR and aS by CIP rules (M = aR, P = aS). InChI writes neither name: it
records the twist as a sign in /t and the mirror image in /m, as for
any stereocentre.
Whether rotation is slow enough to isolate the forms is chemistry, not something InChI computes. InChI decides from the structure alone, with the rules below.
Example: the M form above.
A wedge on a ring bond at the axis shows which edge of that ring points toward you. Two wedges (one per ring) are usual. One wedge is enough, and 3D coordinates work without any wedge.
Atropisomers are detected only with the option -EnhancedStereochemistry.
Without it, the output is exactly the standard InChI.
A bond is a candidate when all of these hold:
axis the four ortho positions
At least three of the four ortho positions must carry something other than H. A fused ring counts. When the axis sits inside a ring of exactly 8 atoms, the two bridge positions are enough.
/t10-/m0/s1The two ortho groups on each ring must differ. If one ring has the same group on both sides, turning it over gives the same molecule: there is no mirror-image pair.
Here one ring has Cl on both sides. Fully hindered, but not chiral: no axis.
From the wedges (or the 3D coordinates) InChI computes a parity for the axis, by the same method it uses for allenes. If the drawing is flat, the twist is unknown and the axis is left out, with the warning:
The two axis carbons get canonical numbers 11 and 12. The axis appears once in
/t, on the lower-numbered carbon. Citing both would read like two
stereocentres.
/m0 is M, /m1 is PRemove the second wedge. The twist is still defined, and the InChI is identical:
Both ends flat, three-connected, without H. C–N, N–N and C–O axes are not detected yet.
A bond in a ring of 6 atoms or fewer is never an axis.
Substituted, or part of a fused ring. Two are enough inside an 8-membered ring.
Two equal ortho groups on one ring: no axis.
All give the same InChI. A flat drawing gives no axis and a warning.
/tOn the lower-numbered axis carbon. The mirror image is in /m.
/t11-/m0/s1/m0, P is /m1For every M/P-labelled molecule in the test set, 2D and 3D alike.
1BMarks the string as enhanced (beta), never mistaken for a standard InChI.
Strings are shown from the first stereo layer on.
No wedges needed: the 3D geometry fixes the axis. +44° is P.
The mirror image, M.
Fused rings count as ortho substituents: each naphthyl end has two.
Its enantiomer: only /m changes.
An 8-ring holds the biaryl twisted, so the two bridge positions suffice. The two CH centres (15, 16) are not wedged in this file, so they read ?.
Axes need not involve aromatic rings: four branched groups hinder this C–C bond.
The C=O carbon is a flat, three-connected end like an aryl carbon.
The first resolved atropisomer (Christie and Kenner, 1922).
The labels of enhanced stereochemistry work on an axis as on a stereocentre: &1 for both forms mixed (racemic), or1 for one form, unknown which.
&1 on the axis: racemic. No /m.
or1 instead: /t11-/s2
Here or1 sits on carbon 12. InChI does not see it and writes the drawn form as absolute, without a warning:
In each case the new InChI equals the standard one.
/b24-23-/t back into a structure (InChI to molfile).Input. A molfile with a wedge on a ring bond next to the axis, on one or both sides, as for the biaryl above. 3D coordinates work without wedges.
Command line. Add -EnhancedStereochemistry:
$ inchi-1 biaryl.mol -STDIO -AuxNone -Key -EnhancedStereochemistry InChI=1B/C12H6Br2Cl2/c13-7-3-1-5-9(15)11(7)12-8(14)4-2-6-10(12)16/h1-6H/t11-/m0/s1 InChIKey=XAIAIAZDMJCXKA-NSHDSACABA-N
Without the option the axis is not seen:
$ inchi-1 biaryl.mol -STDIO -AuxNone -Key InChI=1S/C12H6Br2Cl2/c13-7-3-1-5-9(15)11(7)12-8(14)4-2-6-10(12)16/h1-6H InChIKey=XAIAIAZDMJCXKA-UHFFFAOYSA-N
From a program, pass the option to the InChI library like any other, e.g.
MakeINCHIFromMolfileText(molfile, "-EnhancedStereochemistry", &output)
or in the options string of GetINCHI. The InChI starts with
InChI=1B/: a beta feature, so the format can still change.